Plastering maschine MIXXMANN S8 Reinforced

Description
Complete
Characteristics

Article: 00097469

The MIXXMANN S8 Reinforced multi-voltage plastering station can work in 230V or 400V modes. It is intended for work with dry construction mixtures of machine application, such as: gypsum plaster, lime-gypsum plaster, cement plaster, lime plaster, lime-cement plaster, mortar for masonry, insulating plaster, mortar for poured floor.

Its feature is improved reinforced case!

Hose 3/8" air 11 m - 1 pc.
Hose for solution 25 mm 10 m - 1 pc.
Gasket GEKA - 3 pc.
Gasket 25 mm connection MT-25 - 2 pc.
Washing ball 30 for hose 25 mm - 2 pc.
Connection GEKA hose 3/4" - 2 pcs
Cleaner - 1 pc
Cleaner shaft - 1 pc
Mixing spiral - 1 pc
Mortar gun 50 cm - 1 pc
Scopus for cleaning the gun - 1 pc
Special key for disassembling the water reducer - 1 pc
Template for the nozzle of the gun - 1 pc
Key for the control cabinet - 1 pc
Key for screw pair 30 cm
Angle wrench 24-30 mm
Transition 230V/3x16A to 400V/5x32A
Screw pair SD6-3 - 1 pc
Instruction manual - 1 pc

Technical characteristics

Width: 750 mm
Height: 1550 mm
Length: 1100 mm
Dry mix filling height: 930 mm
Receiving hopper capacity: 140 l
Weight: 260 kg

Power

Electric current consumption: 5.5/7.2 kW
Screw steam drive: 4/ 5.5 kW
Mixture drive: 0.55 kW
Water pump: 0.5 kW
Compressor: 0.52 kW
Rated voltage: 230/400 V
Voltage control: 42 V
Water fittings with flow meter: 100-1500 l/h
Pump drive: bl . 120-400 rpm
Feed drum drive: approx. 28 rpm
Productivity: 8-80 l/min (depending on the composition of the solution and the type of auger pair)
Solution supply distance: 25 m (with a hose diameter of 25 mm) 40 m (with a hose diameter of 35 mm)
Maximum solution injection pressure : 30 bar (depending on the composition of the solution and the type of screw pair)
Operating temperature conditions: from +3 to +45°С
Noise level: 85±1Db

Built-in