Plastering maschine MIXXMANN S3

• Hose 3/8" air 10 m (with GEKA connections) transparent: 1 pc 
• Hose 25 mm 10 m with connections: 1 pc 
• Gasket GEKA: 3 pcs 
• Gasket 25 mm for MT-25 connection: 2 pcs 
• Washing ball 30 mm for a hose of 25 mm: 2 pcs 
• Connection GEKA for a hose 3/4": 2 pcs 
• Eliminator: 1 pcs 
• Eliminator shaft: 1 pcs 
• Mixing spiral: 1 pcs 
• Mortar gun 0.5 m: 1 pcs 
• Cleaning rod for a mortar gun: 1 pcs 
• Special key for the water reducer disassembling: 1 pcs 
• Template gauge for a gun nozzle: 1 pcs 
• Extension cord in rubber insulation 230V 10 m 3x2.5: 1 pcs 
• Key for the control cabinet: 1 pcs 
• Open end wrench 13-19 mm: 1 pcs 
• Screw couple B 4-2 L: 1 piece 
• Fitch: 1 pcs 
• Instructions for the plastering station MIXXMANN S3: Yes

Dimensions, weight, capacity 

• Width: 640 mm 
• Height: 1480 mm 
• Length: 900 mm 
• Dry mixture filling height: 930 mm 
• Inlet hopper capacity: 70l 
• Additional hopper capacity: +70l 
• Plastering machine's weight: 135 kg 

Сapability 

• Electricity consumption: 3.12 kW
• Worm pump drive: 2.2 kW 
• Water pump: 0.5 kW 
• Compressor: 0.42 kW 
• Rated voltage: 230 V
• Circuit breaker: 16 A 
• Voltage control: 42 V 
• Water fitting with a flow meter: 100-1500 L/h 
• Pump drive speed: 80-490 rpm 
• Performance: 3-14 l/min, (Depending on the composition of the mortar and type of screw pair) stepless adjustment 
• Grit size: max 3 mm 
• Mortar feeding distance: 20 m 
• Max pressure of mortar injection: 20 bar (Depending on the mortar composition and a screw pair) 
• Work temperature conditions: from +3 to +45°С 
• Relative humidity: up to 80%
• Noise level: 78±1Db

Built-in 

• Built-in water pump: Yes 
• Built-in additional filter for fine water purification: Yes