Plastering maschine MIXXMANN S6

Description
Complete
Characteristics

Art.: 00095554

Multi-voltage plastering maschine MIXXMANN S6 with the possibility of working in 230V or 400V modes. Intended for work with machine-applied dry construction mixtures, such as: gypsum plaster, lime-gypsum plaster, cement plaster, lime plaster, lime-cement plaster, mortar for (stone) masonry, and insulating plaster.

Hose 3/8" air 10 m (with GEKA connections) transparent: 1 pc
Hose 25 mm 10 m with connections: 1 pc
Gasket GEKA: 3 pcs
Gasket 25 mm for MT-25 connection: 2 pcs
Washing ball 30 mm for a hose of 25 mm: 2 pcs
Connection GEKA for a hose 3/4": 2 pcs
Eliminator: 1 pc
Eliminator shaft: 1 pc
Mixing spiral: 1 pc
Mortar gun 0.5 m: 1 pc
Cleaning rod for a mortar gun: 1 pc
Special key for the water reducer disassembling: 1 pc
Wrench for screw pair 30 cm: 1 pc
Template gauge for a gun nozzle: 1 pc
Key for the control cabinet: 1 pc
Open end wrench 24-30 mm: 1 pc
Screw pair SD 6-3 Slimline: 1 pc
Instructions for the plastering station MIXXMANN S6: Yes

Technical characteristics

Width: 720 mm
Height: 1530 mm
Length: 1370 mm
Dry mixture filling height: 1015 mm
Inlet hopper capacity: 90 l
Additional hopper capacity: 180 l
Plastering machine's weight: 230 kg

Capability

Electricity consumption: 5kW/6,6kW
Worm pump drive: 4 kW/5.5 kW
Water pump: 0.5 kW
Compressor: 0.52 kW
Feed rotor electricity consumption: 2,4 А at 400 V
Circuit breaker: 3 х 16 А
Rated voltage: 230/400 V
Test voltage: 42 V
Water fitting with a flow meter: 100-1500 l/h
Pump drive: 80-400 rpm
Performance: 8-32 l/min, (depending on the composition of the mortar and the type of а screw pair)
Mortar feed distance: 25 m (with the diameter of a hose up to 25 mm), 40 m (with the diameter of a hose up to 35 mm)
Max pressure of mortar injection: 30 bar (Depending on the mortar composition and a screw pair)
Work temperature conditions: from +3 to +45°С
Relative humidity: up to 80%
Noise level: 85Db

Built-in

Built-in water pump: Yes
Built-in additional filter for fine water purification: Yes

The main engine is 5.5 kW

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Main engine valve (knob-lock) MIXXMANN

SKU: 00000389

The main engine is 5.5 kW

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Main engine valve (knob-lock) MIXXMANN

SKU: 00000389

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock MIXXMANN S6/S7/S8

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

MIXXMANN S6 cleaner shaft

SKU: 00095927

Water flow meter 100-1500 l/min

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Electric drive 5.5kW

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Additional hopper MIXXMANN S6 90 l

SKU: 00095600

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock MIXXMANN S6/S7/S8

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Additional hopper MIXXMANN S6 90 l

SKU: 00095600

Water flow meter 100-1500 l/min

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Main motor 5.5kW

SKU: 00000473

Mixing chamber MIXXMANN with flange

SKU: 06383813

Receiving hopper

Main engine shutter (handle-lock) MIXXMANN

SKU: Артикул: 00000389

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Receiving hopper

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Water flow meter 100-1500 l/min

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Main motor 5.5kW

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Main engine shutter MIXXMANN

SKU: Артикул: 00000389

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Receiving hopper

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Витратомір води 100-1500 л/хв

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Main motor 5.5kW

SKU: 00000473

Mixing chamber MIXXMANN without flange type R

SKU: 06383813

Receiving hopper

Main engine valve (knob-lock) MIXXMANN

SKU: 00000389

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Receiving hopper

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Water flow meter 100-1500 l/min

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Main motor 5.5 kW

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Main engine shutter MIXXMANN

SKU: 00000389

Mixer ROTOMIX type D

SKU: 00000411

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Receiving hopper

Домішувач PFT ROTOMIX type D

SKU: 00000411

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Control cabinet

SKU: 00000411

Water flow meter 100-1500 l/min

SKU: 00094557

Komresssor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Main motor 5.5kW MIXXMANN

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Main engine valve (knob-lock) MIXXMANN

SKU: 00000389

Mixer Rotoquirl II type R

SKU: 00002144

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S7/S8

SKU: 00000448

Water flow meter 100-1500 l/min

SKU: 00095501

Tool compartment

Receiving hopper

Agitator Rotoquirl II type D

SKU: 00002144

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock

SKU: 00000470

Hinge Bolt MIXXMANN S6

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Agitator Rotoquirl II type D

SKU: 00002144

Water flow meter 100-1500 l/min

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Main motor 5.5kW

SKU: 00000473

Hopper grate MIXXMANN S6

SKU: 06383813

Receiving hopper

Main engine valve (knob-lock) MIXXMANN

SKU: 00000389

Mixer Rotoquirl II type R

SKU: 00096967

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm with lock MIXXMANN S6/S7/S8

SKU: 00000448

Rubber mixing zone MIXXMANN S6

SKU: 00095501

Tool compartment

Receiving hopper

Mixer Rotoquirl II type R

SKU: 00096967

Wheel 300/70 mm MIXXMANN S6

SKU: 00092617

Wheel 200/56 mm without lock

SKU: 00000470

Hinge Bolt MIXXMANN

SKU: 00095928

Cleaner shaft MIXXMANN S6

SKU: 00095927

Mixer Rotoquirl II type R

SKU: 00096967

Water flow meter 100-1500 l/min

SKU: 00094557

Compressor DELTA 2 MIXXMANN S6/S8 230V

SKU: 00002610

Water pump PKm65

SKU: 00000030

Control cabinet

Configurator

Basic equipment (for gypsum, gypsum-lime plaster) from a 230V network

Stator SD 6-3 Slimline

Art.: 00000341

For gypsum, gypsum-lime plaster, reinforcing solutions, lime-cement plaster < 3 mm, finishing plaster (mineral).

Rotor SD 6-3 Slimline

Art.: 00000272

For gypsum, gypsum-lime plaster, reinforcing solutions, lime-cement plaster < 3 mm, finishing plaster (mineral).

Rubber mixing zone MIXXMANN S6

Art.: 00095501

Mixing spiral MIXXMANN

Артикул: 00095926

For gypsum plaster, For cement plaster

Lower flange type D MIXXMANN S7/S8

Art.: 00093619

Lower flange nipple MIXXMANN 1 1/4"

Art.: 00000402

Connection VT-25 internal thread 1 1/4"

Art.: 00000130

Additional bunker

Additional hopper MIXXMANN S6 90 l

Art.: 00095600

Complete set (for gypsum, gypsum-lime plaster) from a 400V network

Stator D 6-3 Putz Power

Art.: 00000345

For gypsum, gypsum-lime plaster, reinforcing solutions, lime-cement plaster < 3 mm, finishing plaster (mineral).

Rotor D 6-3 Putz Power

Art.: 00000346

For gypsum, gypsum-lime plaster, reinforcing solutions, lime-cement plaster < 3 mm, finishing plaster (mineral).

Kit for decorative plasters, adhesive and reinforcing solutions, poured floors (type D) for crimping

Stator D 8-1.5 for crimp-fitting coupling

Art.: 00000357

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Rotor D 8-1.5

Art.: 00000356

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Crimp-fitting coupling type D 255 mm

Art.: 00000268

Kit for decorative plasters, adhesive and reinforcing compositions, poured floors with mixer (type R) for crimping

Mixing chamber MIXXMANN without flange type R

Art: 00093797

Stator R 8-1.5 for crimp-fitting coupling

Art.: 00004135

For bulk self-leveling floors 85 l

The maximum fraction size is 8 mm

Rotor D 8-1.5

Art.: 00000356

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Crimp-fitting coupling type R 270 mm

Art.: 00096534

Bottom flange type D/R MIXXMANN S6

Art.: 00096553

Kit for decorative plasters, adhesive and reinforcing solutions, poured floors with mixer (ROTOMIX type D)

Mixer ROTOMIX type D

Art.: 00000411

ROTOMIX is installed as a mixer on the mixing chamber of plastering machines.

It serves to improve the quality of the mixture, exclude the appearance of lumps and reduce the number of air bubbles in the mixture.

Use: Decorative plasters, adhesive and reinforcing compositions, poured floors

Crimp-fitting coupling type D 255 mm

Art.: 00000268

Stator D 8-1.5 for crimp-fitting coupling

Art.: 00000357

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Rotor D 8-1.5 with trunnion

Art.: 00000358

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Kit for decorative plasters, adhesive and reinforcing compositions, bulk floors with mixer (Rotoquirl II type D)

Mixer Rotoquirl II type D

Art.: 00002144

The mixer Rotoquirl II type D is installed as a mixer on the mixing chamber of plastering machines.

It serves to improve the quality of the mixture, exclude the appearance of lumps and reduce the number of air bubbles in the mixture.

Use: Decorative plasters, adhesive and reinforcing compositions, poured floors

Anchor tie (pin) 16x150 mm MIXXMANN S6

Art.: 00096981

Stator D 8-1.5 for crimp-fitting coupling

Art.: 00000357

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Rotor D 8-1.5 with trunnion

Art.: 00000358

For decorative plaster, bulk self-leveling floors 35 l, mortar for masonry, lime-cement plaster > 3 mm

Crimp-fitting coupling type D 255 mm

Art.: 00000268

Kit for decorative plasters, adhesive and reinforcing compounds, bulk floors with mixer (Rotoquirl II type R)

Mixer Rotoquirl II type R

Art.: 00096967

The Rotoquirl II type R mixer is installed as a mixer on the mixing chamber of plastering machines.

It serves to improve the quality of the mixture, exclude the appearance of lumps and reduce the number of air bubbles in the mixture.

Use: Decorative plasters, adhesive and reinforcing compositions, poured floors

Anchor tie (pin) 16x150 mm MIXXMANN S6

Art.: 00096981

Upper suction flange type R for MIXXMANN S6

Art.: 00096634

Stator R 8-1.5 for crimp-fitting coupling

Art.: 00004135

For bulk self-leveling floors 85 l

The maximum fraction size is 8 mm

Rotor R 8-1.5 with trunnion

Art.: 00004136

For bulk self-leveling floors 85 l

The maximum fraction size is 8 mm

Crimp-fitting coupling type R 270 mm

Art.: 00096534

Bottom flange type R MIXXMANN S6

Art.: 00096553

Plastering maschine MIXXMANN S6

Configurator

Photo Gallery

MIXXMANN S8

MIXXMANN S3

MIXXMANN S3 Plus

MIXXMANN S5

MIXXMANN S6

MIXXMANN S7

MIXXMANN S8 PLUS